DPP-x57 (640x480)

5.7" iLCD Panel with Resisitve Touch Screen 640x480 Pixel - DPP-T57

Backside of 5.7" iLCD Panel with Resisitve Touch Screen 640x480 Pixel - DPP-T57

5.7" iLCD Panel with Capacitive Touch Screen 640x480 Pixel - DPP-C57

DPP-x57 (640x480)

DPP-T57 | DPP-C57 | DPP-57

DPC3090 32-bit iLCD controller
128 MByte flash memory for user data
8 MByte RAM for screen save/restore
Resistive or capacitive (PCAP) touch screen
Single 5 Volt (optional 3.3 Volt) power supply
USB port
RS232 port with 3.3 Volts
I²C port and SPI port
Controls up to 16 digital outputs
Controls up to 16 digital inputs
4 analog inputs with 12-bit resolution
Controls 2 relays or speaker/buzzer, PWM output
Controls a keyboard matrix with up to 128 keys
Real-time clock with battery backup
MicroSD card holder and connector for external SD Card on board

Send Request

Show price

DESCRIPTION

5.7" iLCD Panel with resistive / capacitive / without Touch Screen 640x480 Pixel | Part No. DPP-T57 / DPP-C57 / DPP-57

The 5.7" iLCD is an industry standard size with a VGA resolution of 640x480 pixel on an active screen area of 112.9x84.7 mm. The 5.7" iLCD panel contains our fast 32-bit iLCD controller DPC3090 and 128 MByte on-board flash memory. The DPP-T57 is fully compatible with its predecessor, the DPP-CT6448, i.e. operation, outline dimensions and pin assignment are identical.

The DPP-C57 touch screen deploys the projected capacitive (PCAP) touch technology. For multi-touch operation, configuration parameters allow activation of up to five simultaneous touch points. Detected finger movements on the screen are reported to the device’s interpreting application. Adaptation to application-specific capacitive couplings is possible by means of further configuration parameters.

In addition to the convenient high-level commands, the iLCDs can be programmed with Java. The firmware integrates a lean Java VM which executes the compiled Java code. Java Display Computing makes it possible to program the HMI sequencing in Java, to carry out arithmetic operations and to even control the whole application with the iLCD panel. Project development is done within the iLCD Manager XE which has been extended to accommodate a complete Java development environment including editor, compiler and debugger.

128 MByte flash memory for images, text strings, fonts and macros and 8 MByte RAM for multiple screen handling with simple commands recommends this iLCD panel to be used with any application. A microSD card holder is on board enabling you to further expand your memory for images and use specific use. Additionally, the DPP-T57 provides the option to externally connect a standard SD card by means of an on-board connector.The DPP-T57 iLCD can operate in portrait mode as well.

The optional TCP/IP Interface allows networking of iLCDs and rapid download of application data. Therefore it is also recommended for accelerated development of stand-alone applications, which will be ultimately controlled by any other interface (USB, RS232, I²C or SPI).

The excellent TFT display with a brightness of 350 cd/m² and a contrast of 500 shows your graphics either with full 16-bit color depth or with 8-bit (with 16-bit color palette created by the setup software automatically) color depth. As seen on all other iLCD panels, animated images (color GIF images) can be displayed easily within minutes.

Evaluation Kits with the 5.7" iLCD panels are available for trial, testing and application developing while having the iLCD panel connected to the PC. It includes all the necessary hardware and software ingredients to perform the whole range of available iLCD features.