Set Watchdog Interval

\i P W word::interval

Parameter	Type	Range	Description
interval	word	0 ... 65535	interval in units of 10ms

Sets the watchdog interval according to interval.

The maximum interval is 655.35 seconds (10.92 minutes).
Setting the interval causes the current watchdog interval to be retriggered.
An interval of 0 disables the watchdog.
By default, the watchdog is disabled. Hence it will be automatically disabled on startup and by the commands Reset All or Reboot Panel Controller.
If the PC fails to trigger the watchdog before its time is expired, the panel controller activates the port pin assigned to the ARES function for a certain time (the "Reset impulse" is 200ms by default, but can be modified on the "Settings" page of iLCD Manager XE), disables the watchdog and shows the watchdog reset message ("Watchdog Reset" by default, but can be modified on the "Settings" page of iLCD Manager XE) on the LCD display.
If the watchdog-reset message is empty, no watchdog reset message is displayed. If no pin is assigned to the ARES port function, no hardware activity will be carried out on watchdog reset.

Response:

[ACK]

Example

\iPW\D1000

Sets the watchdog interval to 10 seconds.