Set Shadow Offset

\i A H S byte::x_offset byte::y_offset

Parameter	Type	Range	Description
x_offset	signed byte	-100 ... 100	horizontal shadow offset
y_offset	signed byte	-100 ... 100	vertical shadow offset

Sets the shadow offset for the drop shadows of subsequent shape drawing (refer to Draw Rectangle, Draw Styled Circle, Draw Ellipse).

If the origin of a shadow shape has negative coordinates, the drop shadow is disabled in the corresponding shape drawing function.
The default values for x_offset and y_offset is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
If any offset is 0, the shadow of shapes will be drawn with the historic default: half of the line thickness (refer to Set Line Thickness) if the frame is drawn and 1 pixel if not.

Response:

[ACK]

Example

\iAHS\20\-10

All subsequent shapes are drawn with a drop shadow 20 pixels to the right (positive x) and 10 pixels above (negative y) the original shape.

Not supported by: DPC3020, DPC2060, DPC10xx