Set Line Caps Style

\i A L C byte::style

Parameter	Type	Range	Description
style	byte	0 ... 2	style of the line caps

Sets the style of the line caps according to the following styles (the red dot represents the specified coordinates for the line ending):

Style	Description
0
1
2

• The default value for style is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iALC\1

After issuing this command, all subsequently drawn lines will have rectangular line caps and will start and end precisely at the specified coordinates (no overlapping).

Not supported by: DPC3020, DPC2060, DPC10xx

Draw Rectangle
Set Line Thickness
Set Line Ending Mode