Set Graphic Name Suffix

\i X S G string::suffix

Sets a suffix of case-sensitive string characters, which will be put after any subsequently sent graphic name (see Display Local Graphic).

• This functionality can be used to support multiple languages without conditional commands or macros. For example, if the graphic names for the English language are suffixed with "_en" and for the German language with "_de", the command

  \iG\mgraphic\0

  would display the graphic "graphic_en" or "graphic_de", dependent on the prior defined graphic prefix.
• When addressing graphics by index, an offset can be used to realize language switching. (see Set Graphic Offset).
• Remove any previously set Graphic Name Suffix by entering an empty string as suffix:

  \iXSG\0
• The default value for suffix is an empty string. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Example

\iXSG_en\0

Set the graphic name suffix to "_en" and will subsequently only use graphics that end with these characters.

Not supported by: DPC3020, DPC2060, DPC10xx

Display Local Graphic
Load Animated Graphics
Set Graphic Offset
Set Graphic Name Prefix
Set Message Name Suffix
Set Macro Name Suffix
Set Font Name Suffix