Set Font Offset

\i X O F word::offset

Parameter	Type	Range	Description
offset	word	0 ... max. font index - 1	offset of the font index

Sets an offset for the font index (see Set Font).

This functionality can be used to support multiple languages without conditional commands or macros. For example, if the fonts for the English language are indexed 0 to 9 and for the German language 10 to 19, setting the Font Offset to 10 will automatically select the German fonts instead of the corresponding English ones.
When addressing fonts by name, a prefix or suffix can be used to realize language switching. (see Set Font Name Prefix or Set Font Name Suffix).
The default value for offset is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller if the "Extras on Reset" option on the "Settings" page of iLCD Manager XE is set to "Clear". Selecting "Keep" allows for using the reset commands without loosing e.g. the selected language. This setting is ignored in firmware versions < 3.02.

Response:

[ACK]

Example

\iXOF\D3
\iAF\D1
\iDTHello World!\0

Sets the font offset to 3. The subsequently called command to select the font with index 1 will now set the font with index 4 instead.

Not supported by: DPC3020, DPC2060, DPC10xx