Enable/Disable Reporting Touch-Coordinates

\i T K bool::on_off

Parameter	Type	Range	Description
on_off	bool	0 ... 1	determines whether reporting is on (1) or off (0)

Enables or disables the reporting of touch coordinates.

Note

When reporting a pressed or released touch field normally only the key is reported as described in Touch Field Press/Release. Under certain circumstances the coordinates of pressing and releasing the field is of interest as well. With this command it can be set that reports also contain the coordinates of a touch event (see Touch Field Press/Release + Coordinate of Event).
The default value for on_off is 0. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.

Response:

[ACK]

Example

\iTK\1

Enables the reporting of touch event coordinates.