Adjust Display

\i D A bits::mode

Parameter	Type	Range	Description
mode	bits	Bit 0 ... 4	flags for possible modifications

Adjusts the color values of all pixels on the screen. The value for any selected modification has to be set in advance and the corresponding mode bit must be true:

Bit	Description
0	brightness (see Set Brightness Adjustment)
1	contrast (see Set Contrast Adjustment)
2	hue (see Set Hue Adjustment)
3	saturation (see Set Saturation Adjustment)
4	invert

• All adjustment modifications can be combined and changed simultaneously with this command. The modifications are processed in the following order: invert - hue/saturation - brightness/contrast.
• This command can be used to dim or brighten the entire screen by adjusting brightness and contrast.

Response:

[ACK]

Example

\iDA\x3

Adjusts brightness and contrast of the entire screen, using the previously set values.

Not supported by: DPC3020, DPC2060, DPC10xx

Adjust Display Area
Set Brightness Adjustment
Set Contrast Adjustment
Set Hue Adjustment
Set Saturation Adjustment
Set Adjustment for Graphics