Set Width of Screen

\i M S W byte::screen word::width

Parameter	Type	Range	Description
screen	byte	M, 0 ... number of screens - 1	index of the screen to set the height (M = main screen)
width	word	0 ... display width	value for the width to be set

Sets the width of the screen with index screen.

The width of the main screen (index 'M') is not modifiable.
Width and height (refer to Set Height of Screen) of a screen are taken into account when being copied (refer to Copy Screen From) or painted (refer to Paint Screen From).
If the screen with index screen was never activated as a draw screen before or screen exceeds the available screens, [NACK] is returned.
If the width of a screen is decreased, the right hand part of the screen will be cut.
When cropping a screen, this screen can not be selected as draw or view screen any longer. To make a screen selectable again, the width and height have to be restored to the full display size.

Response:

[ACK]

Example

\iMSW\4\D123

Provided the screen with index 4 was activated, its width will be set to 123 pixels.

Not supported by: DPC3050, DPC3020, DPC2060, DPC10xx