Set Backlight Mode

\i C B byte::mode

Parameter	Type	Range	Description
mode	byte	0 ... 3	mode for the backlight

Sets the backlight to the following options for mode:

Mode	Description
0	backlight off
1	backlight on
2	blink backlight
3	fade-out backlight (when previously on or blinking)

• The default value for mode is retrieved from the EEPROM emulation at location 2. It will be automatically set to default on startup and by the commands Reset All or Reboot Panel Controller.
• When the EEPROM is erased, the default value is obtained from the Flash data set on the "Settings" page of iLCD Manager XE. See further information about EEPROM at EEPROM Related Commands.

Response:

[ACK]

Example

\iCB\2

This example causes the backlight to blink.

Get Backlight Mode
Set Backlight Blink Frequency
Set Backlight Intensity
EEPROM Related Commands