Device

	Select Communications Port Select USB, Ethernet or serial port.
	Currently selected USB/Ethernet device Lists assigned device name and the serial number. Note: available if USB or Ethernet port is selected.
	Enumerate Devices Enumerate devices or Attach a name to a serial number Note: available if USB or Ethernet port is selected.
	Select Serial Port Name Select serial port - Enter the port name if not showing in the list. Note: available if serial port is selected.
	Select Baud Rate Select the baud rate matchning the settings of the currently connected iLCD panel. Note: available if serial port is selected.
	Change Serial Port Settings Change the appropriate serial port settings. Note: available if serial port is selected.
	Get/Set Properties Save and restore display settings View the iLCD panel's properties Update the iLCD Controller's firmware
	Test Device Test the connected iLCD panel. The backlight of the display will blink.
	Read Project Read back the project data from the currently connected iLCD panel.
	Write Current Project [Ctrl+W] Write the current project to the iLCD panel currently connected.
	Send Commands [Ctrl+Enter] Send commands from the editor window to the iLCD panel.
	Save Commands Save commands from the editor window to a file.
	Load Commands Load commands to be sent to the iLCD panel from a file.
	Set White Space Mode Determine how to handle white space characters (spaces and carriage returns / linefeeds).
	Code Page Select code page from the list to be used for iLCD commands.
	Open Documentation [Shift+Ctrl+F1] Click the button to open the PDF file. Click the option indicator to open/close the Control Sequences hint window.
	Erase [Shift+Ctrl+BkSp] Erase commands to be sent to the iLCD panel.
	Show Commands in Hex Show commands to be sent to the iLCD panelin Hex as well.