Draw Styled Circle

\i D c bits::mode word::radius

Parameter	Type	Range	Description
mode	bits	Bit 1, 3 ... 6	flags for the circle properties
radius	word	1 ... max[width, height]	radius of the circle

Draws a circle using the currently selected line thickness with the radius radius and the current cursor position as center. The parameter mode allows to set several properties for the circle:

Bit	Description
1	drop shadow
3	filled with background color
4	use foreground color for filling (bit 3 must be set too)
5	filled with current fill pattern (bits 3 and 4 ignored if set)
6	draw without outline
7	alpha blending for shadow only

• Drawing the circle outline is done with the current border color (see Set Border Color). The shadow is drawn with the current border shadow color (see Set Border Shadow Color). Outline and shadow drawing is done with alpha blending if set before (see Set Alpha).
• By default, alpha blending is done for every activated feature (outline, filling, shadow). When mode bit 7 is set, the shadow will still be drawn with alpha blending, but outline and filling will have full opacity (refer to Set Alpha).
• The line style attribute is ignored for circle drawing (see Set Line Style).
• If the drop shadow bit is set, but the shadow offset (see Set Shadow Offset) leads to a negative center of the shadow circle, no shadow will be drawn.
• When filling with a pattern (bit 5), the fill pattern has to be set in advance via Set Filling Color, Set Filling Gradient or Set Filling Tile. When filling with a tile graphic, any previously set adjustments for graphics are taken into account (see Set Adjustment for Graphics).

Response:

[ACK]

Example

\iDc\x62\D125

Draws a filled circle without an outline with a radius of 125 pixels and a drop shadow.

Not supported by: DPC3020, DPC2060, DPC10xx

Draw Line
Draw Circle
Draw Rectangle
Draw Ellipse
Set Border Color
Set Border Shadow Color
Set Line Thickness
Set Filling Color
Set Filling Gradient
Set Filling Tile
Set Alpha